ABSTRACT
Objective To conduct the 7th investigation by Chinese Society of Radiation Oncology,Chinese Medical Association,and to further investigate the current situation of radiotherapy in mainland China,reasonably allocate personnel and equipment resources,and promote the development of radiotherapy in China.Methods From October 8,2015 to December 2015,the office for investigation of radiotherapy information was established,the list and contact information of radiotherapy units were provided by each province,and a special data submission system was used for a complete,rapid,and efficient investigation through the Internet.Results As of January 20,2016,there were 1 413 radiotherapy units in the mainland China with 52,496 employees in total,among which there were 15 839 radiotherapy physicians (4824 with senior professional titles),8 452 technical therapists (260 with senior professional titles),3 292 physicists (562 with senior professional titles),and 938 maintenance engineers (120 with senior professional titles).In the aspect of radiotherapy equipment,there were 1930 linear accelerators,96 Co-60 teletherapy units,173 X-knife units,212 γ-knife units,382 Ir-192 brachytherapy units,436 Co-60 brachytherapy units,1 051 X-ray simulators,1 353 CT simulators,642 MRI simulators,978 sets of multileaf collimators,1922 sets of treatment planning systems,and 974 sets of radiotherapy network systems.As for quality control devices,there were 1 792 dosimeters,2 143 ionization chambers,935 two-dimensional array dosimeters,540 threedimensional dosimetric verification systems,596 three-dimensional water tanks,844 anthropomorphic phantoms,and 1 168 water equivalent phantoms.In the aspect of therapeutic situation,there were 102,170 beds (including beds in departments of oncology in general hospitals),76612 episodes per day,and 919339 episodes per year.Conclusions The results of this investigation show significant increases in radiotherapy units,personnel,and equipment in recent years in mainland China.The distribution of radiotherapy units and equipment and the structure of radiotherapy personnel are becoming more reasonable,but there are still some problems.In some regions,current radiotherapy equipment cannot meet the medical needs,and there is a lack of professional technical personnel.
ABSTRACT
Objective To investigate influence on dose distribution due to cavity and inhomogeneous structures using thermoluminescence dosimeters (TLD) and Chengdu phantoms.Methods A cavity 4 cm × 4 cm × 3 cm was made by a head and neck phantom and a lung phantom was cut into slices which were got a CT scanning and setup in a digital simulator.The TLD were pasted on edge and in the center of cavity structure and inhomogeneous structures.Treatment plans of different radiotherapy technologies were made generated and delivered on a linear accelerator.Then the TLD were read and analyzed.Results There were remarkable cavity effects of conventional single field,opposite fields and IMRT plans with 7 fields for head and neck phantom.There is similar effect in lung phantom.The more complexity the radiotherapy technology was the less cavity effect.Conclusions It is necessary to consider using more advanced radiotherapy technology or applying more fields to make treatment plans in order to decrease the cavity effect or similar effect when there are inhomogeneous structures.
ABSTRACT
ObjectiveTo compare the calculation precision of the collapsed cone convolution (CCC) algorithm and pencil beam convolution (PBC) algorithm in TPS in heterogeneous tissue.Methods We made two virtual lung phantoms,one is single field phantom,In this case the photon beam incident into the phantom,the other is the two fields phantom and a cubic'tumor' was placed in the centre of the phantom.two opposite photon beams incident into the phantom.We calculated the dose of the'tumor' and the lung with the CCC and PBC algorithm.We compared the results in both case with if obtained from Monte Carlo (MC) method.ResultsIn the single field phantom,the photon beam incident from the high-density tissue to the low-density lung equivalent tissue,compared with the result of MC algorithm PBC algorithm overestimated the lung equivalent tissue dose (t =3.90,P =0.012) and the result of CCC algorithm is close to it ( t =2.25,P =0.087 ).In the two fields phantom,tumor boundary dose calculated by CCC algorithm and the MC algorithm are lower than that of the PBC algorithm (t =2.43,3.18,P =0.038,0.011 ),and the difference increase when the field size decrease, the beam energy increase and the density of the inhomogeneity decrease.ConclusionsWe had better use the CCC algorithm when calculating the dose of the tumor surrounded by low-density tissue or the tumor behind the low-density tissue,such as the lung cancer,esophageal cancer etc.
ABSTRACT
ObjectiveTo study of the impact on dose distribution by electron width of energy spectrum and angular distribution using Monte Carlo simulation.MethodsThe simulated electron energy spectrum and angular distributions was as the input parameters and percentage depth dose (PDD) and offaxis curves were simulated by a modified PENELOPE code package. Results PDD and off-axis dose distribution curves are almost the same and are not sensitive to energy spectrum width and angular distribution with the exception of energy spectrum width of 2.5 MeV with obviously different curves.ConclusionsIn the situation of clinical treatment,spectrum and angular distributions can be ignored when their width are not very large.It is helpful to save about 9％ time by using monoenergy beams in treatment planning system development.
ABSTRACT
Objective To calculate the effects of thermoplastic mask on X-ray surface dose.Methods The BEAMnrc Monte Carlo Code system, designed especially for computer simulation of radioactive sources, was performed to evaluate the effects of thermoplastic mask on X-ray surface dose.Thermoplastic mask came from our center with a material density of 1.12 g/cm2. The masks without holes,with holes size of 0. 1 cm× 0. 1 cm, and with holes size of 0. 1 cm × 0. 2 cm, and masks with different depth (0.12 cm and 0.24 cm) were evaluated separately. For those with holes, the material width between adjacent holes was 0. 1 cm. Virtual masks with a material density of 1.38 g/cm3 without holes with two different depths were also evaluated. Results Thermoplastic mask affected X-rays surface dose. When using a thermoplastic mask with the depth of 0. 24 cm without holes, the surface dose was 74. 9% and 57.0% for those with the density of 1.38 g/cm3 and 1.12 g/cm3 respectively. When focusing on the masks with the density of 1.12 g/cm3, the surface dose was 41.2% for those with 0.12 cm depth without holes;57.0% for those with 0. 24 cm depth without holes;44. 5% for those with 0. 24 cm depth with holes size of 0.1 cm ×0.2 cm;and 54.1% for those with 0.24 cm depths with holes size of 0.1 cm ×0.1 cm.Conclusions Using thermoplastic mask during the radiation increases patient surface dose. The severity is relative to the hole size and the depth of thermoplastic mask. The surface dose change should be considered in radiation planning to avoid severe skin reaction.